0
Cone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpm
Cone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpmCone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpm

Cone Drive B061040 BANTB 40:1 Right Angle Ratio Gear Reducer 56C 43rpm

Current Price: $99.99
  • Frame Size: 56
  • Ratio: 40:1
  • Input RPM: 1750
  • Input Shaft Diameter: 5/8"
  • Vent: Not vented, will need to be vented prior to use
  • Input H.P: 2.965
  • Output RPM: 43.75
  • Output Shaft Diameter: 1-1/8"
  • Output Torque (lbs): N/A
  • Shaft Output (Left, Right or Inline): LEFT OR RIGHT
THIS IS A USED GEAR REDUCER THAT IS IN GOOD CONDITION.
It has no leaks and no play.
The output shaft can be swapped from left to right by removing a snap ring, or be removed completely to have 1-7/16" keyed hollow output shaft.
The urethane sleeve that goes inside the input shaft and over the motor shaft, as used by Cone Drive is not included with this gear reducer.
 
Details
  • Brand: Cone Drive
  • Size: Length: 12 in. Width: 10 in. Height: 10 in.
  • Condition: Used
  • SKU: 208244
  • Consigner: J
  • Warehouse Storage Location: BE-07-01-S2
  • Shipping Weight (lbs, oz): 27,
  • Lister: jw
  • Country of Manufacture: United States
  • Items in Lot: 1
  • Frame Size: 56
  • Ratio: 40:1
  • Input RPM: 1750
  • Input Shaft Diameter: 5/8"
  • Vent: Not vented, will need to be vented prior to use
  • Input H.P: 2.965
  • Output RPM: 43.75
  • Output Shaft Diameter: 1-1/8"
  • Output Torque (lbs): N/A
  • Shaft Output (Left, Right or Inline): LEFT OR RIGHT
THIS IS A USED GEAR REDUCER THAT IS IN GOOD CONDITION.
It has no leaks and no play.
The output shaft can be swapped from left to right by removing a snap ring, or be removed completely to have 1-7/16" keyed hollow output shaft.
The urethane sleeve that goes inside the input shaft and over the motor shaft, as used by Cone Drive is not included with this gear reducer.