This is a new 2-Stage bevel gearbox.
Ratio is 8.178 to 1
Input rpm is 1400
Output RPM is 171.2 rpm
Torque 81Nm
Size 4
28mm keyed hollow shaft
Foot mounting without centring, and no flange.
This reducer will fit on a motor with a IEC 71 Frame size
The I.D. of the flange is 110MM
The bolt holes are on a 130MM diameter pattern.
The input shaft has a Rotex KTR size 19 coupling on the reducer side and buyer will need to provide the coupling for the motor side.
